The Wood Protection Company

25G Malahide Road,
Artane,
Dublin 5.
Phone : 01 445 6545

August News

 

The Wood Protection Company is proud to announce the new distribution of Bondex products. Contact us today for more information.

Products

Thursday 21st, August

 

Regatta Yacht Varnish

 

Where to use: Wooden boats.

Drying Time: Recoatable: 4 hours.

Storage: Firmly closed and frost-free.

VOC: EU limit value for this product (cat. A/e): 500 g/l (200). This product contains max 450 g/l VOC.

Pre-treatment: The most durable result is achieved by priming with a BONDEX primer.

Application: New wood: 2‐3 coats of BONDEX Regatta Yacht Varnish.

Previously varnished wood: Slight sanding, wet or dry. Detached spots should be treated with a BONDEX primer.

Worn-down, discolourated wood: Plane, scratch or sand until sound wood. Do not use at temperatures below 5°C or above 80% relative humidity, based on a daily average.

Thinning: Do not thin.

Cleaning Tools: White spirit.

   

Matt Finish Wood Stain

 

Where to use: For treatment and maintenance of all exterior and interior woodwork and planed timer.

Drying Time: Touch dry: approx. 6 hours.

Recoatable: next day. At 23ºC and standard humidity (60%).

Storage: 5 years in unopened containers. Store frost‐free.

VOC: EU limit value for this product (cat. A/e): 500 g/l (2007) / 400 g/l (2010). This product contains max. 399 g/l V.

In General: Stir well before use. Keep container firmly closed after use.

Pre-treatment: Previously treated wood must be taken back down to bare wood by planing or sanding. Algae, grease, and dirt must be removed. New, untreated, and detached softwood must be protected with a BONDEX Preservative.

Treatment: 2 x BONDEX Matt Finish

Application: By brush, dipping or spraying. Do not use at temperatures below 5°C or above 80% relative humidity, based on a daily average.

Thinning: Do not thin.

Cleaning Tools: White spirit

   

Long Life Wood Preservative

 

Where to use: Structural wood, framework timber, indoor and outdoor wood. All construction timber for structural work (timber located under cover away from damp), timber frames, and outdoor wood (except for sill plates or sections in contact with the ground).

Drying Time: Drying depends on: Temperature, wood species, ambient humidity and quantity of product applied.

Preventive Treatment: The surface of the timber should be clean and free of any finishes. Two or three coats on all surfaces, painted or applied by low pressure spraying without introducing air, paying particluar attention to embedded parts and assemblies.

Remedial Treatment: Bore and cut away attached sections. Replace any damaged sections. The surface of the timber should be clean and free of any finishes.

Thinning: Do not thin.

Cleaning Tools: Soap and water.

   

Quick Drying Wood Stain

 

Where to use: Outdoor on absorbing wooden surfaces. Both for dimension and non dimension stable wood.

Drying time: Dust dry: app. ½ hour.

Recoatable: app. 3 hours. Measured at 23⁰C and standard humidity(60%).

Storage: 2 years in unopened containers. Store frost free.

VOC: EU limit value for this product (cat. A/e): 150 g/l (2007) / 130 g/l (2010). This product contains max. 15 g/l VOC.

Pre-treatment: Previously painted or varnished surfaces must be taken back down to bare wood by planing or sanding. Algae, grease, and dirt must be removed. New, untreated and detached softwood must be pre-treated with a BONDEX preservative.

Treatment: 2-3 coats of BONDEX Quick Drying Wood Stain.

Application: Apply with brush. Do not use product at temperatures below 5°C or above 80% relative humidity.

Thinning: Do not thin.

Cleaning Tools:Soap and water

   

Quick Drying Floor Varnish

 

Where to use: For interior use on parquet floors, cork floors and woodwork. For floors exposed to heavy wear like halls, stairs, living rooms etc., we recommend adding our special hardener.

Drying Time: Touch-dry: Approx. 30 minutes. Re-coatable: Approx. 4 hours.

Storage Stability:3 years in unopened containers. When mixed with hardener 8 hours.

Storage: Firmly closed and frost-free.

Pre-treatment: Waxed floors must be planed down. Previously varnished surfaces must be sanded to mat surface and cleaned. Residues from soap and lime must be removed. The surface must be free from oil, grease, dirt and dust before treatment. We recommend making a small test on old, varnished floors before applying the whole area.

Application: Apply by brush or roller. During application and drying, the temperature must be above 5C and the relative humidity below 80%.

Thinning: Do not thin.

Cleaning Tools: Soap and water.

   

Dauerschutzfarbe

 

Where to use: All types of exterior and interior wood.

Drying Time: Touch-dry: Approx. 1 hour.

Re-coatable: Approx. 12 hours.

Wait 48 hours before closing coated window frames.

Storage Stability: 5 years in unopened containers.

Storage: Firmly closed and frost-free.

In General: Stir well before use. Keep container firmly closed after use.

Pre-treatment: On oak and red cedar in light shades, we recommend pre- treatment with BONDEX Wood Preservative. Exterior untreated conifer to be pre-treated with BONDEX Wood Preservative. It is not necessary to pre-treat hardwood.

Treatment: 2 x BONDEX Dauerschutz Holzfarbe

Application: Brush or roller.

Thinning: Do not thin.

Cleaning Tools: Soap and water.

   

Satin Finish Wood Stain

 

Type: Transparent, alkyd based wood finish.
Where to use: For treatment and maintenance of all external and internal woodwork and planed timber. Ideal for windows and doors.
Form supplied : Ready for use.

Colour Range : Available in different colours and colourless, see colour card.

All standard shades and colourless are intermixable

 

 

Please feel free to contact us and we will be happy to assist you for your individual needs